MSBTE Electrical Engineering 6th Semester Micro Project Topics
22625 Maintenance of Electrical Equipment
a) Collect information on safety signs used for electrically hazardous areas.
b) Prepare a case study report on faulty electrical machine in institute campus through
inspection, conduction of tests, troubleshoot and remedial actions needed,
c) Visit electrical machine manufacturing unit and collect data of various tests conducted on it.
d) Prepare a report on diagnosis of transformer oil sample by conducting various tests on it.
e) Collect information of specifications, uses, cost of various tools and equipment needed for maintenance of different electrical machines.
22626 Utilization of Electrical Energy
a) Illumination: Design suitable lighting scheme for a laboratory or class room.
b) Prepare report on market survey of various types of lamps(specification, manufacturer, application and cost) and do its comparative analysis. ?
c) Electric heating: Prepare power point presentation related to heating furnaces.
22627 Electrical Estimating and Contracting
a. Electrical Diagrams: Prepare a report on existing electrical drawing.
b. Domestic and commercial Installations: Collect civil engineering drawing and
prepare estimation for the same.
c. Industrial Installations: Collect industrial installation plan and prepare estimation for
the same using software's as E-tab etc.
d. Distribution Lines: Collect existing installation plan of distribution lines and prepare
estimation for the same.
e. Public Lighting Installations: Collect existing installation plan of street lighting
scheme and prepare estimation for the same.
f. Contracting: Collect any tender document related to electrical installation and fill all
related documents.
22628 Emerging Trends in Electrical Engineering
a. Prepare a report on existing automation in an industry and suggest improvements.
b. Prepare a report on Smart Grid.
c. Prepare a report on any four Electrical Applications in Smart cities.
d. Present a power point presentation on various IMCCs.
e. Prepare a report on the procedure of meter reading by MRI and AMR techniques.
f. Conduct a survey and prepare a report on the IMCCs in one industry.
g. Prepare a report on mobile apps used for energy billing procedures.
22629 Industrial Drives and Control (Elective-I])
a) AC motor power rating for given application: Determine the power rating of
fractional h.p. ac motor required for the given desert cooler to lift the water up to
1.5 meter. Assume efficiency between 50 to 75% of rated load.
b) Brush less DC motor: Design and assemble 24 Volt, 500 W BLDC motor for robotic
applications.
c) Reversible SCR drive : Design reversible SCR drive using four quadrant chopper
or using L293D and 1.298 dual H-bridge motor driver ICs for controlling the rotation
of the motor in both clockwise and anticlockwise direction.
d) PWM inverter: Design PWM inverter using 8051 micro controller for speed control of the given AC motor.
e) Battery operated vehicles: Design a battery operated bicycle of rating 24V/36V/48V, 250W/500/W/1000W using brushless DC motor. A battery electric vehicle (BEV) is a type of electric vehicle(EV) that uses chemical energy stored interchangeable battery packs. BEVs use electric motors and motor controllers instead of internal combustion engines (ICEs) for propulsion. They derive all power from battery packs and thus have no internal combustion engine, fuel cell, or fuel tank. BEVs include motorcycles, bicycles, scooters, skateboards, rail cars, watercraft, forklifts, buses, trucks and cars.
22632 Power System Operation and Control (Elective-ID)
a) Indian National grid and Regional grid: Collect information and prepare charts with
significant details.
b) Major power failure: Collect information about power failure in / outside India.
c) Load dispatch center: Prepare technical presentation on details Sf functioning of
RLDCs.
d) Social impact on Load forecasting: Collect information about nearby social activities
which affect Load forecasting.
c) Environmental impact on Load forecasting: Collect information about changes in
environment which affect Load forecasting.
f) Load shedding: Collect information about strategy adopted in specific area.
22633 Electrical Substation Practices (Elective-IT)
a) Power / distribution transformer: Prepare chart showing three phase power /
distribution transformer.
b) Neutral grounding: Collect specification from different manufacturers and prepare
report.
c) Sub-station equipment: Collect specification from different manufacturers and
prepare report.
d) Gas Insulated Substation: Collect photographs with details of Gas Insulated
Substation and identify different parts (specification, application, cost, features,
manufacturer)
e) Single line diagram of sub-station: Prepare Single line diagram of sub-station
MSBTE Diploma All Branch Projects:
- Computer Engineering
- Information Technology
- Civil Engineering
- Electrical Engineering
- Mechanical Engineering
- Electronic Engineering
Click on Any Branch or Any Semester to go on it. If you want your suggested projects then please let us know in our comment section. comment down your .......
1.Name: *******
2.Branch: *******
3.Semester: ******
4.Project Topic: *****
Share with your all friends & help them to score more.
THANK YOU😇
Tags:
MSBTE Projects