MSBTE Mechanical Engineering 5th Semester Micro Project Topics
22563 Advanced Manufacturing Processes
1. Prepare a list of industrial components which are produced through non conventional
machining processes and describe the manufacturing procedure of the same in brief
2. Prepare a list of domestic and industrial components on which Lapping, honing, buffing, Electroplating, Galvanizing, metal spraying and powder coating are performed. For each process collect information about the material, machines and other resources required. Also prepare list of industries in your state doing these processes.
3. Manufacture any product like a small assembly of components which has been designed in the course Design of Machine Elements. Student will prepare the report on following.
i. Prepare production drawings of the assembly and details.
ii. Manufacture the parts.
iii. Note down work holding devices, cutting tools and cutting parameters used for each
part and each operations. Summarize this in tabular form.
iv. On completion, present and share the experience of this mini project
with photos/videos of mini project execution and with work distribution executed. Use power point presentation.
4. Produce job with various machining methods:
i. Should include plain/taper turning, knurling, threading, cylindrical/surface grinding, etc.
ii. Sketch the production drawing of the part.
iii. Outline the processes.
iv. Calculate/select, set, observe and record the cutting parameters for each process.
v. List the cutting tools and measuring instrument like vernier caliper, micrometer or gauge if
any you have used. Also state specifications of each.
vi. List the work holding devices you have used. Also state specifications of each.
vii. Produce the part
5. Produce a complex job:
i. Part should include shaping, milling, drilling, tapping, boring, slotting, surface
grinding, cylindrical grinding, super finishing like lapping, polishing etc.
ii. Select and sketch the production drawing of the part.
iii. Outline the processes. Prepare process plan for the same.
iv. Prepare workshop layout and route sheet.
v. Produce the part, Calculate/select, set, observe and record the cotilting parameters
for each process.
vi. List the cutting tools you have used. Also state specifications of each.
vii. List the work holding devices you have used. Also state specifications of each.
6. Prepare a technical report on specifications, operating procedure, selection of operational parameters, details about tool/work holders used, machine settling, product details being manufactured for each method/machine like gear forming/geminating, honing/lapping/buffing machine, Non-conventional machine, Broaching machine etc.
7. Visit a work shop which contains latest industrial Turret lathe, Capstan lathe, Single spindle autunites, Automatic machines. Write a detail report on working of such machine or machines, parts produced, and other relevant information. Identify the jobs produced on such machines and draw the sketches of jobs.
8. Study and report 1.0 commonly used work piece materials and best grades of cutting tools
that used to cut them efficiently.
9. Study machining process and reduce machining cycle time of parts JOB SHOWS.
22053 Solid Modelling and Additive Manufacturing
1. 2D drawing: Each student will collect one or two drawings from the near,by industry/workshop and prepare a 2D drawing from it.
2. 3D model: Each student will identify a small assembly from the institute workshop/laboratory. Measure the dimensions of each part and prepare sketches. Using sketches prepared 3D model of parts and assembly. Plot the assembly and detail drawings. (eg. Bench vice, Machine vice, Tool post, Couplings, Joints, Bearings etc.)
3. 3D printing/RPT: Each student will visit a nearby institute/industry. Collect information regarding troubleshooting of 3D printer/Rapid prototyping machine and prepare a report.
22509 Management
1. Study of management principles applied to a small scale industry.
2. Study of management principles applied to a medium scale industry.
3. Study of management principles applied to a large scale industry.
4. Prepare case studies of Safety measures followed in different types of organization.
5. Study of measures to be taken for ensuring cyber security.
22562 Power Engineering and Refrigeration
a) Display various components of MPFI system on wooden board with labels.
b) Prepare a report on OBD measurements.
c) Take sample of cooling load calculations sheet; list the components of cooling load along with percentage contribution of different loads in a refrigeration air conditioning.
d) Display various parts of a hermetically sealed / open compressor on wooden board
with labels.
e) Collect and display different gaskets required for a single cylinder /mu1ti cylinder
IC engine.
f) Prepare report on different types of“ lubricating oils, oil filters, coolants, for
petrol engines wrt physical and chemical properties, cost, safety, disposal etc.
g) Make a working model of air compressor.
h) Prepare a step-by-step procedure for dismantling and assembly of multi cylinder IC
engine. Tabulate different tools used in dismantling of IC engines against components for which
these tools are used.
i) Collect information about electrical motor drives used in vehicles such as Tesla
and Google's car.
j) Comparative study of hybrid vehicles alid conventional vehicles.
k) Collect charts using internet regarding Combustion: combustion in SI engines, pre-ignition, detonation — concept, factors affecting detonation, Homogeneous Charged Compression Ignition Engine.
1) Collect working and constructional details of different types of Reciprocating and
Rotary compressors.
m)Collect specifications, working and constructional details of differs refrigeration
and air conditioning units (Domestic refrigerator, water co and cold storage, Window, split
air-conditioner, central air-conditioning)
22564 Elements of Machine Design
1. Take any day to day life component. find load. stresses and also prepare chart/model for the same.
2. Make models of various joints and levers highs ight resisting sections of different elements.
3. Make models of various shafts, keys and pulleys highlight resisting section.
4. Make models of various couplings highlight resisting sections of different elements.
5. Prepare list of different types of bearlngs used in r1 bike and write their
specifications and basis for selection.
22565 Tool Engineering
a. Preparation of Wax/Rubber model of various dies/single point cutting tools.
b. Collect various Carbide inserts as per ISO specification.
c. Measure press capacity of any press available in industry or nearby industry.
d. Design simple Clamming devices/Jigs/Fixtures/locating for simple jobs.
e. Collect specifications of different Jigs and fixtures.
r. Sketch different jigs /fixtures/clamping devices available in institute workshop.
g. Identify and restrict degree of freedom of a given component for designing a clamping/locating device for a given machining operation.
22566 Power Plant Engineering (Elective)
a) Collection of information of control systems of power plant.
b) Collection of information about nearby cogeneration plant.
c) Comparative study of various parameters of performance evaluation of a power plant.
d) Measure operating parameters of Boiler using appropriate instruments.
e) Maintenance of a diesel generator set (DG set).
f) Collect information regarding preventive, predictive and breakdown maintenance of
various power plants.
g) Develop maintenance procedure for preventive and predictive maintenance of a
typical Hydro Power Plant and its components.
h) Develop maintenance procedure for preventive and predictive maintenance of a
typical Diesel power plant and its components.
i) Develop maintenance procedure for preventive and predictive maintenance of typical FBC
boilers and its components.
j) Develop maintenance procedure for preventive and predictive maintenance of a
typical High-pressure boiler and its components
k) Develop maintenance procedure for preventive and predictive maintenance of a
typical Steam Power Plant and its components.
1) Develop maintenance procedure for preventive and predictive maintenance of a
typical Gas Power Plant and its components.
MSBTE Diploma All Branch Projects
In MSBTE I Scheme they have suggested Micro-Projects. Only one micro-project is planned to be undertaken by a student that needs to be assigned to him/her in the beginning of the semester. In the first four semesters, the micro-project are group-based. However, in the fifth and sixth semesters, it should be preferably be individually undertaken to build up the skill and confidence in every student to become problem solver so that s/he contributes to the projects of the industry. In special situations where groups have to be formed for micro-projects, the number of students in the group should not exceed three.
The micro-project could be industry application based, internet-based, workshop based, laboratory-based or field-based. Each micro-project should encompass two or more COs which are in fact, an integration of Pros, UOs and ADOs. Each student will have to maintain dated work diary consisting of individual contribution in the project work and give a seminar presentation of it before submission. The total duration of the micro-project should not be less than 16 (sixteen) student engagement hours during the course. The student ought to submit micro-project by the end of the semester to develop the industry oriented COS.
MSBTE Diploma All Branch Projects:
- Computer Engineering
- Information Technology
- Civil Engineering
- Electrical Engineering
- Mechanical Engineering
- Electronic Engineering
Click on Any Branch or Any Semester to go on it. If you want your suggested projects then please let us know in our comment section. comment down your .......
1.Name: *******
2.Branch: *******
3.Semester: ******
4.Project Topic: *****
Share with your all friends & help them to score more.
THANK YOU😇
Tags:
MSBTE Projects