MSBTE All Branch 1st Semester Micro Project Topics
22001 Fundamentals of ICT
a. Word documents: Prepare Time Table, Application,
Notes, Reports. (Subject teacher shall assign a document to be prepared by each student)
b. Slide Presentations: Prepare slides with all
Presentation features such as classroom presentation, presentation about the department, presentation of
the report. (Subject teacher shall assign a presentation to
be prepared by each student).
c. Spreadsheets: Prepare Pay bills, tax statements,
student’s assessment records using a spreadsheet. (Teacher shall assign a spreadsheet to be prepared
by each student).
22101 English Micro Project Topics
a. Report different types of episodes/anecdotes.
b. Seminar preparation and presentations.
c. Prepare written speeches on given topics.
d. Prepare and participate in debates and extempore
speeches.
22102 Basic Science Physics &
Chemistry Micro Project Topics
a. Optical Fiber and TIR: Prepare
models by using water and diode laser to demonstrate total internal reflection and the working of optical
fibre.
b. Conductivity: Collect different
materials such as metal, plastics, glass etc. and prepare models to differentiate between good and bad conductors
within collected materials.
c. Gas laws: Prepare models to
demonstrate Boyle's laws, Charle's Law and Gay Lussac’s law uses household materials.
d. Battery and Cell: Collect wastage
material from lab and household and prepare a working model of a cell.
e. Adhesives: Prepare a model to
demonstrate the applications of various adhesives.
f. Polymer: Collect the samples of
different polymers and list their uses.
g. Series and parallel resistances:
Prepare models for a combination of series and parallel resistances using
bulbs/ LED.
h. Systems and units: Prepare chart on
comparison of systems of units for different physical quantities.
i. Magnetic flux: Prepare models to
demonstrate magnetic lines of forces of different types of magnets.
j. Dimensional analysis: Prepare a
chart on dimensions of fundamental and derived physical quantities and highlights the applications of dimensional
analysis.
k. Types of bonds: Prepare charts and
models displaying different types of bonds with examples.
l. Ionization: Prepare chart displaying
ionization phenomenon.
22103 Basic Mathematics Micro Project Topics
a. Prepare charts using determinants to find the
area of regular shapes.
b. Prepare models using matrices to solve simple
problems based on cryptography.
c. Prepare models using matrices to solve simple
mixture problems.
d. Prepare charts displaying regular solids.
e. Prepare charts displaying regular closed
figures.
f. Prepare charts for grouped and ungrouped data.
22341 Mechanical Working Drawing Micro
Project Topics
a. Visit nearby fabrication
workshop and prepare a report on various types of welding symbols used for
fabrication work.
b. Visit nearby process industries like sugar
factories, chemical industries etc and prepare a report representing
conventional representation of various piping Joints.
c. Visit Institute's Power
engineering Lab and prepare detailed drawings of Various IC
Engine components using proper measuring instruments.
d. Visit Institute's workshop and
prepare assembly drawing and working drawing of” machine vice/ lathe
tailstock/ tool post etc.
e. Any other micro-projects suggested by
subject faculty on a similar line.
e. Prepare Brochure for Seminar/ Conference
f. Prepare different types of assignments:
i.
Prepare a seminar brochure
ii.
Prepare a National conference brochure
iii.
Prepare an International conference brochure
iv.
Prepare a poster for Inter Polytechnic Paper Presentation competition
v.
Prepare a leaflet(threefold) giving information about your Institute
vi.
Prepare a leaflet about the admission process of Polytechnic
g. Compose review on the following:
i.
Short stories
ii.
Novels
iii.
Films.
h. Prepare a questionnaire and conduct the
interview of Principal/Head of Department/
Senior Faculty Members/ Senior Students/ Industry
Personnel.
i.
Summarise views of the authors of editorial columns of English newspapers.
j.
Write ‘Letters to Editor’ column expressing views on social issues.
22343 Engineering Graphics
a. Helical springs: Each batch will collect 5 open
coils and closed coil helical springs of various sizes. Each student will measure the significant
parameters of one spring and draw the corresponding helix
curve in his sketchbook.
b. Flat coil or spiral springs: Each batch will
collect 10 spiral springs of various sizes. Each student will measure the significant parameters of one spring
and draw corresponding helix curve in his sketchbook.
c. Isometric views: Each student of the batch will
try to collect at least one production drawings/ construction drawings/plumbing drawings from local
workshops/builders /electrical and mechanical contractors and try
to generate isometric views from the orthographic views are given in
the drawings.
d. Isometric views: Each student of a batch will
select a household/industrial real item and will draw its isometric view in the sketchbook.
e. Isometric and orthographic views: Each batch
will collect a single-point cutting tool from the workshop and draw its Isometric and orthographic views
with a ten times enlarged scale. In the carpentry shop, each
batch will try to make a wooden model from these views.
f. Isometric views: The teacher will assign one set
of orthographic projections and ask the student to develop 3D thermocol models of the same.
g. Involute curves: Each batch will try to develop
cardboard/thermocol working models which can generate an involute curve of any regular geometrical
shape.
h. Cycloidal curves: Each batch will collect 3
different sizes of bicycle tyres and compare the locus of tube air valves by rolling them on a flat road.
i. Conic curves: Each batch will go to the
institute’s playground and one student standing on the boundary throws a ball to the wicket-keeper who is 30
meters away from the thrower and the ball has reached
a maximum height of 20 meters from the ground, draw the path of the ball and
identify the type of conic curve it has traced in the air.
j. Involute and Cycloidal curves: Each batch will
collect one Involute and one cycloidal tooth profile spurs
gear and find out the Involute function.
MSBTE Diploma All Branch Projects:
- Computer Engineering
- Information Technology
- Civil Engineering
- Electrical Engineering
- Mechanical Engineering
- Electronic Engineering
Click on Any Branch or Any Semester to go on it. If you want your suggested projects then please let us know in our comment section. comment down your .......
1.Name: *******
2.Branch: *******
3.Semester: ******
4.Project Topic: *****
Share with your all friends & help them to score more.
THANK YOU😇
Tags:
MSBTE Projects
Name-Shaikh Rehan
ReplyDeleteBranch-IT
Semester-5
Project topic- Capstone project planning
Client Side Scripting Language
Name : Rizwan Khan
ReplyDeleteBranch : Computer (CO)
Semester : 2
Project : Installation procedure of Printer and Scanner